5/5 - (1 vote)
Models | D140 |
Cutting Type | Drag knife with TurboCut and Tangential Emulation Modes |
Tool Compatibility | Blade, Pen, Pounce Tool |
Cutting Width | 135 cm (53 inch) |
Cutting Speed | All SummaCut models cut at speeds up to 1131 mm/sec (44 ips) diagonal |
Axial Speed | Up to 2 G |
Alignment Type |
Y-Line compensation |
Maximum acceleration | Up to 3 G diagonal |
Tracking Performance | Within ± 0.1 mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1 mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide |
Cutting force | 0-400 grams of down-force, in 5 gram increments |
Replot Memory | 4 MB (buffer size: 16 MB) |
Display Languages | English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian |
Connectivity | content-products.collections.summacut.tech-specs.d-series.Connectivity.description |
Power Requirements | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum |
Dimensions | 175 (W) x 68 (D) x 114.5 (H) cm (68.9 (W) x 26.8 (D) x 45.1 (H) in.) |
weight | 48 kg (106 lbs) |
Operating Temperature | 15˚ to 35˚C (59˚ to 95˚F) |
Standard Accessories | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades. |
Optional Accessories |
با ارسال دیدگاه های خود در سایت، جهت بهبود مطالب مارا یاری فرمایید
دیدگاه کاربران