5/5 - (1 vote)
| Models | S2 D140 |
| Cutting Type | Drag knife with TurboCut and Tangential Emulation Modes |
| Cutting Widths | S2 D140 135 cm (53.1 inch), Extended Mode: material width |
| Cutting Speed | All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal |
| Axial Acceleration | Up to 4 G |
| Maximum acceleration | Up to 5.5 G diagonal |
| Alignment Type |
Y-Line compensation |
| Tracking Performance | Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide |
| Accuracy | 0.2 % of movement or 0.25 mm, whichever is greater |
| Cutting Force | 0-400 grams of down-force, in 5 gram increments |
| Display Language | English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese |
| Connectivity | USB; Ethernet |
| Power Requirements | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum |
| Dimensions | S2 D140 202 (W) x 68 (D) x 111 (H) cm (79.6 (W) x 26.8 (D) x 43.7 (H) in.) |
| Shipping Weight | S2 D140 90 kg (198 lbs) |
| Operating Temperature | 59˚ to 95˚F (15˚ to 35˚C) |
| Standard Accessories | WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket. |
| Optional Accessories | Roll-up system for Summa S Class 2 140 and Summa S Class 2 160 |
با ارسال دیدگاه های خود در سایت، جهت بهبود مطالب مارا یاری فرمایید
دیدگاه کاربران